DINITROL PRODUCTS
ANTI-CORROSION WAXES
DINITROL ML
Brown cavity wax for doors, frame members and exterior joints and crevices
The super penetrating brown coloured product is specially designed for applying into closed cavities such as doors, frame members and exterior joints and crevices. DINITROL ML is a penetrating cavity wax ideal for rust-proofing second-hand cars, trucks, buses and other commercial vehicles. Stops existing rust.
DINITROL 1000
Protection for closed cavities, doors and other parts of cars
DINITROL 1000 is designed for application in closed cavities as well as open surfaces. It leaves a waxy, transparent, water repellent film.
DINITROL 3654-1
For closed cavities, doors and other parts of cars, trucks & buses
DINITROL 3654-1 is a penetrating cavity protection that leaves a light brown, waxy and water repellent protective film. Designed for application in closed cavities and on open surfaces on vehicles, as well as transport protection on spare parts.
DINITROL 4941
Black solvent based underbody coating
DINITROL 4941 is a thixotropic underbody, protection leaving a black, tough, elastic and waxy film, giving excellent protection against corrosion and abrasion. Dinitrol 4941 is also designed to be used on spare parts, machines, and iron and steel structures in high corrosion inductive conditions.
DINITROL 4010
Specifically designed for engine compartments
DINITROL 4010 is a heat resistant corrosion prevention suitable for engine compartments Resistant to alkali and acids. Gives a hard, transparent, dry film. Good adhesion of rubber and plastic parts. Very short drying time.
DINITROL 479
Extremely thixotropic road sound damping coating
DINITROL 479 is a thick, wear resistant and sound absorbing rust protective, undercoating product. Mainly intended to be used on the vehicle underbody, wheel arches and door sills. For best result, pre-treat with a thin penetrating product.
BODY PRODUCTS
DINITROL 440
Long-term protection against stone chipping
DINITROL 440 is a grey permanently elastic corrosion prevention product that also protects against chipping from road stones. It has a sound deadening effect and can be overpainted. It does not contain aggressive solvents such as chlorinated hydrocarbons and will not attack PVC coatings.
DINITROL RC 900
Rust converter
DINITROL RC 900 is supplied in a convenient aerosol for easy application. It converts rust into a stable organic iron complex, whilst providing a protective barrier layer against further corrosion occurring. The specialist rust converter is highly penetrating compared to other products and contains a complex organic chelat base and epoxy solution.
DINITROL 410 UV
Quick-drying and elastic polyurethane sealing and bonding product
DINITROL 410 UV (NF – New Formula) is a 1-component polyurethane sealing and bonding compound with good resistance and UV stability. The sealer is quick-drying and elastic, and can be coated with most lacquers. 2-C acrylic lacquers can be applied in a wet-on-wet process. Paints containing alcohol and alkyd resin impair hardening. New improved product formula.
DINITROL 7710
Hand cleaner
DINITROL 7710 Hand Cleaner is a paste-like, exfoliating hand cleaner with a wood meal base. It is suitable for removing normal to medium amounts of dirt. It contains an extremely effective combination of surfactants and a high proportion of moisturising substances for skin-friendly treatment. The high cleaning power of the product is enhanced by biodegradable wood meal-based exfoliating particles. The pH value of the product has been adapted to match the skins own acid mantle.
DIRECT GLAZING
DINITROL 500
Direct glazing adhesive
The black coloured product is a humidity-curing and one component polyurethane adhesive for the direct-glazing of automotive glasses. The product provides good adhesion on paints with excellent working characteristics. DINITROL 500 is a low odour, high elasticity, solvent and PVC free, OEM approved product with excellent ageing and weather resistance properties.
DINITROL 582
Cleaning agent for auto glass before bonding
The transparent DINITROL 582 is a fast-drying cleaning agent to clean motor glass before bonding. DINITROL 582 effortlessly removes dust, fingerprints or oil residues which often cause problems when bonding. DINITROL 582 can also be used for de-greasing of metal surfaces.
DINITROL 538 PLUS
Pre-treatment for replacing polyurethane direct-glazed automotive glass
The primer is a multi function pre-treatment product to be used when replacing polyurethane direct-glazed automotive glass parts and other substrates. The black primer promotes the adhesion between the glass and painted surface. DINITROL 538 Plus direct glazing adhesive also provides UV protection. It also inhibits rust in small nicks and scratches, the long life primer is also compatible with all DINOL adhesive systems.
DINITROL 550
Pre-treatment primer for various paints & metals
The multiprimer DINITROL 550 is a black solvent based physical, reactive drying primer. The primer is designed as a pre-treatment for several paints but also as a pre-treatment for different metals and for different kinds of plastics. Substrate must be clean, dry and free of oil and grease. In the majority of cases we recommend to rough the bonding area with a very fine scotch brite. For the further pre-treatment it is a must to apply first the adhesion promoter DINITROL 520, before the application of the black primer DINITROL 550.
